Heartpulse Earrings

A pair of earrings representing heart pulses.

Bill of Materials

You will need:

Earring hooks
Eye pins for earrings (0.6 mm diameter, 16 mm length)

A very small amount of glue can be useful to ensure the eye pins stay firmly in place.

Instructions

Each earring has a small hole at the top. Simply insert an eye pin through the hole, then attach the hook to the eye pin.
If needed, you can apply a tiny drop of glue to the eye pin before inserting it to secure it more effectively.

Printing recommandations

Use a 0.2 mm or 0.4 mm nozzle with the Arachne wall generator enabled in your slicer for the best results.
Print on a smooth build plate (smooth PEI or similar).
If you experience adhesion issues, make sure your build plate is thoroughly cleaned.

Design

Font Awesome icons were used as the basis for the heart pulse.

Descrição

Bill of Materials

Instructions

Printing recommandations

Design