Update Nov 15, 2025:  I've received some requests for a separated model.  There are now “Top” and “Bottom” step files that you should be able to attach with either a 2mm bolt or probably better, a piece of filament melted on the ends.  The inner part of the hinge is 2.5mm so it will rotate easily on whatever hinge you choose.  Also, Please DON'T print this if you have a Legion Go 2.  I've been told the controllers have changed.  I don't have those controllers so I can't create a new model for them. 

Update Aug 17, 2025:  After some feedback on the clasp and my own dislike of putting the controllers in upside down, I've made modifications to both.  The clasp is now integrated with the front rim of the case and the controllers go in right side up.  See new pictures.

Update:  My friend returned from his trip and said it worked great.  I have received some comments that the latch is weak.  If you redesign, please post.  I have also added a separated top & bottom step files so you can print in 2 pieces for smaller beds.  It's a 2mm hole for the hinge so 1.75mm PLA melted on both sides might work.  Or, you could use M2 screws.  I haven't tried it.  Please post if you do.

I made this controller case for a friend who keeps his Legion Go screen in a separate sleeve, but didn't want the controllers banging around in a backpack. The connector piece is labeled left and right for easy of orientation when connecting to controllers. Controllers go upside down on pegs. I just gave it to him and he's headed on a big trip so we will see how it wears.

This is my first attempt at a clamshell box type design.