Hueforge Imperial Logo

---------------------------------------------------------------------------------------------------------

Become a Patreon Free Member and vote for upcoming models …
www.patreon.com/thereallagnor69

---------------------------------------------------------------------------------------------------------

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 140x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

Filaments Used:
    PLA BambuLab Matte Dark Blue Transmission Distance: 1
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:
    Start with Dark Blue
    At layer #9 (0.8mm) swap to Red
    At layer #17 (1.44mm) swap to Yellow
    At layer #21 (1.76mm) swap to White for the rest.
 

---------------------------------------------------------------------------------------------------------

Here you find the frames for the hueforge

200 × 140 mm & 140 mm × 200 mm || All-in-One-Frame
[https://makerworld.com/de/models/897636#profileId-856000](https://makerworld.com/de/models/897636#profileId-856000)

200 x 200 mm || All-in-One-Frame
[https://makerworld.com/de/models/766355#profileId-701658](https://makerworld.com/de/models/766355#profileId-701658)

---------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------