Hello,
Here's a new mod for the AMS Lite.

I wanted easier access to my spools from the top of my enclosure. The whole thing also needed to be very compact.

You'll need to disassemble the blocks (please refer to the instructions on the BambuLab website). The original screws are used for assembly. You can add two M3/M4 screws on the sides (optional).

Therefore, proceed at your own risk.

The print is done in PETG with the AMS to get the transparent strip, as I already had some transparent PETG. If you have transparent PLA, that works very well too.
The transparent strip allows you to see the activity LEDs.