Ski Wall Mount for Bent Chetler 100 etc.

This Print was primarily designed to mount my Bent Chetler 100 Ski to my Wall. If your ski has similar dimensions it should fit as well. 

Installation

For installation you need two wall plugs / wall anchors. Chose the size according to your wall. For my wall 6mm was enough and plenty strong. As fasteners I would recommend the size I have used: countersunk screw ø 4,5mm and 45mm in length you can find them in any hardware store or online. For example: ([https://www.spax.com/de-de/p/universalschraube-teilgewinde-senkkopf-t-star-plus-4cut-wirox.html](https://www.spax.com/de-de/p/universalschraube-teilgewinde-senkkopf-t-star-plus-4cut-wirox.html)) 

Keep in mind: Your Ski needs to have about 20-30 cm of clearance to the ceiling because you need to lift it higher then it will rest to remove or insert it into the wall. For installation I inserted the ski into the mount an marked its position on the wall. 

How to use the Mounts

Insert the ski into the mount near the centre of the Ski and let it slide down to lock it into place. For removing the ski, simply lift it up until it can come out of the front of the Mount. 

Feedback

If you like the model and want to help me Improve what I post on here, please like this post, rate this model and leave a comment on what you like to see improved in future models.