Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
What is Bookfinity?
Bookfinity let's you store your tools, components and consumables in books on a bookshelf to replace boring tool boxes.
All books have a gridfinity grid inside, letting you take full advantage of the 1000s of tool holders and component bins in the eco-system.
This model is working progress but currently has 48 books.
Update (07/05/2026)
I've made a new version of bookfinity for customising your own books inside Bambu Studio, check it out here:
Bookfinity - Easy Edit Version
Update (13/12/2025)
I've made a new version of these books with a latch turning them into little toolboxes. Perfect for storing small bits and chucking the boxes into your rucksack. Check it out here: Bookfinity Books with Latches
There's a large range for A1 Mini's here:
A few people have asked what bins are best for these. Any will do but I've uploaded my simple 1x1 bins that work perfectly for these books. Check them out here: Gridfinity Simple Bins
Assembly Instructions
Print both the top cover and the bottom cover of the book. If you're not using the 3MF files, you need to change color at 4mm layer.
2. Insert 4mm diameter, 3mm deep magnets into the corners. This helps align it before gluing.
3. Glue the top and bottom covers together using super glue. Cover the area shown below.
4. Insert the bins / gridfinity holder for your book
5. Boost the model.
All Books
All Books Table
| Name | Size | Bin Height | Category | Required Bins |
| M2 Nuts & Bolts | 3 x 4 | 4U | Nuts & Bolts | |
| M2.5 Nuts & Bolts | 3 x 4 | 4U | Nuts & Bolts | |
| M3 Nuts & Bolts | 3 x 4 | 4U | Nuts & Bolts | |
| M4 Nuts & Bolts | 3 x 4 | 4U | Nuts & Bolts | |
| M5 Nuts & Bolts | 3 x 4 | 4U | Nuts & Bolts | |
| M6 Nuts & Bolts | 3 x 4 | 4U | Nuts & Bolts | |
| M2 Screws | 3 x 4 | 4U | Nuts & Bolts | |
| M2.5 Screws | 3 x 4 | 4U | Nuts & Bolts | |
| M3 Screws | 3 x 4 | 4U | Nuts & Bolts | |
| M4 Screws | 3 x 4 | 4U | Nuts & Bolts | |
| M5 Screws | 3 x 4 | 4U | Nuts & Bolts | |
| M6 Screws | 3 x 4 | 4U | Nuts & Bolts | |
| Self Tapping Screws | 3 x 4 | 4U | Nuts & Bolts | |
| Nuts | 3 x 4 | 4U | Nuts & Bolts | |
| Nyloc Nuts | 3 x 4 | 4U | Nuts & Bolts | |
| Washers | 3 x 4 | 4U | Nuts & Bolts | |
| Heat Insert Nuts | 3 x 4 | 4U | Nuts & Bolts | |
| Batteries | 3 x 4 | 4U | Consumables | |
| Cable Ties | 3 x 4 | 4U | Consumables | |
| Heat Shrink Tubing | 3 x 4 | 4U | Consumables | |
| Magnets | 3 x 4 | 4U | Consumables | |
| USB Cables | 3 x 4 | 4U | Consumables | |
| Bearings | 3 x 4 | 4U | Consumables | |
| Super Glue | 3 x 4 | 4U | Consumables | |
| Tape | 3 x 4 | 4U | Consumables | |
| Drill Bits | 3 x 4 | 4U | Consumables | |
| Batteries | 3 x 4 | 6U | Consumables | |
| USB Cables | 3 x 4 | 6U | Consumables | USB Cable Holder |
| Tapes | 3 x 4 | 6U | Consumables | |
| Files | 3 x 4 | 4U | Tools | |
| Screwdrivers | 3 x 4 | 4U | Tools | |
| Tweezers | 3 x 4 | 4U | Tools | |
| Hex Keys | 3 x 4 | 4U | Tools | |
| Picoscope with Probes | 3 x 4 | 9U | Tools | Picoscope Holder |
| Screwdrivers | 3 x 5 | 6U | Tools | |
| Wrenches | 3 x 5 | 6U | Tools | |
| Crimping Tool and Ferrules | 3 x 5 | 6U | Tools | |
| Soldering Iron | 3 x 4 | 4U | Tools | |
| Resistors | 3 x 4 | 4U | Electrical | |
| Capacitors | 3 x 4 | 4U | Electrical | |
| Choc Blocks | 3 x 4 | 4U | Electrical | |
| WAGO Connectors | 3 x 4 | 4U | Electrical | |
| Wire | 3 x 4 | 4U | Electrical | |
| Hot Ends | 3 x 4 | 4U | Other | |
| 3D Printer Tools | 3 x 4 | 4U | Other | |
| Medicine | 3 x 4 | 4U | Other | |
| First Aid | 3 x 4 | 4U | Other | |
| Hot Ends | 3 x 4 | 6U | Other | |
| 3D Printer Tools | 3 x 4 | 6U | Other | |
| Medicine | 3 x 4 | 6U | Other | |
| First Aid | 3 x 4 | 6U | Other |
Parametric Model
There is also the Fusion360 Parametric files released so you can create your own books.
There is also a fully customizable version available here using the markerworld customizer tool.
Here's a tutorial of how to make your own Bookfinity models.
Notice a mistake? Got advice / requests?
Please leave comments, or DM me (:
Remember to also post photos of your books!
Want commercial use of this model?
This model is free to use, remix and edit.
Updates
- 09/11/25 - Initial Release
- 10/11/25 - Added Hot Ends, 3D printer Tools, Medicine, First Aid, Bearings, Super Glue, Tape, Soldering Iron.
- 10/11/25 - Updated Fusion model to fix grid scaling. Added tutorial video.
- 15/11/25 - Updated all books to V1.5 fixing the hinge and reducing the filament required.
- 15/11/25 - Added SVGs to files.
- 15/11/25 - Added 6U versions of Hot Ends, 3D printer Tools, Medicine, First Aid.
