I needed a Stackable Mini Storage Box for my latest maker's supply shipment. There are already some very nice boxes on makerworld but I wanted a more efficient print that does not use a lot of filament. My box weights only 72g and can be printed in under 90 min if you are using a 0.4mm HF nozzle.
The size is 149 x 106 x 79mm and it has a volume of 970ml. The box and its lid is scalable to an extent. I successfully printed a 125% version.
For easy storage of empty bins they can be stacked inside each other. Besides that you can securely stack closed boxes on top of each other. The integrated interlocking pattern will keep the box-tower stable.

Print preparation:
Make sure that your print bed is clean and grease-free and use a quality brand and dry filament.

Print settings:
Use a 0.4mm nozzle with 0.2mm layer standard settings. Turn on Spiral Vase mode, set the outer wall to 0.8mm line width. You need 8 bottom layers to get the pattern on the box and lid right. Slightly reduce the speed of the outer walls for a better quality. Crank up the speed if you are using HF nozzles. Supports are not needed.
See my print profile for more details.

And now bring order to your small parts and stack all the boxes!

If you want to support me you can leave a tip at ko-fi.com/blecheimer.

Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0. The shown model must not be used commercially.
Copying this model to other 3D printing websites is not allowed without my permission.