Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.88mm and the Actual Thickness is 1.6mm

Filaments Used:
    PLA BambuLab Black  Transmission Distance: 0.3
    PLA BambuLab Basic Blue  Transmission Distance: 4
    BambuLab Basic Jade White  Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Blue
    At layer #14 (1.2mm) swap to Jade White for the rest.