This model is a true-to-life sculpture designed to be a stunning centerpiece for any room. Unlike low-poly models, this design focuses on capturing the natural wrinkles, skin texture, and lifelike features of this magnificent animal.

It's a challenging and rewarding print that results in a professional-looking piece of wall art.

Model Features

• High-Detail & Realistic: Expertly sculpted to show fine details, from skin texture to the horn's grain.
• Easy Mounting: A built-in keyhole slot on the back makes it simple and secure to hang on any wall.
• Scalable: While designed for a significant presence, you can scale it in your slicer. (Be aware that scaling down may lose some fine details).

Printing Instructions

This is a detailed model and requires supports for a clean print.

• Orientation: Print the model lying on its back (the flat part that goes against the wall should be flat on the build plate). This provides the best orientation for the facial details.
• Layer Height: 0.16mm or 0.20mm is highly recommended to capture all the fine skin textures and details.
• Supports: Yes, supports are required.
  • They will be needed for the chin, the tip of the horn(s), and potentially the ears, depending on the angle.
  • Recommendation: Use Tree / Organic Supports for the easiest removal and cleanest surface finish. Set them to "Touching Buildplate" first, but check the slicer preview to see if "Everywhere" is needed for the chin.

• Infill: 10-15% is sufficient.