Razor Spacer

Recreation of the WrapTrooper. Works with 9mm snap off blades. It takes a 5x10mm circular magnet and allows your knife to trim either 2mm or 7mm away from the edge. I recommend printing in PETG and with a support interface filament.

These are the magnets I used:

[https://www.amazon.com/Eokoaiee-Decorative-Building-Scientific-Magnets/dp/B07VZN77RP/ref=sr_1_9?crid=352NWQYYXHVIL&dib=eyJ2IjoiMSJ9.xT52QFoZU0pxPw62uM4VTgWZgpz82vZi6ygq2vfx0532U4_z5dBOScCYFBarKwZ2GKpAZqVLdUtN_dhxE_4mIlTdY8mu4-7tlU6gdZpr8zel6f_C5USmPX9FM6PLz2dhOkVrUMdWVZHrUR7H109Zzn8A7hKpWaQtSjOe_mk0Zv9TN55oJiM5tSihiv8A2S6M63_MRsjV9tcaXhLGf1DBc2nm_ostfmMVGrhwt5tsNVQ.9TTFoO5kuEq_qmk0sNSGZRKUiLswtSifF_0oskkYZ1g&dib_tag=se&keywords=5+x+10+round+magnet&qid=1763836159&sprefix=5+x+10+round+magnet%2Caps%2C161&sr=8-9](https://www.amazon.com/Eokoaiee-Decorative-Building-Scientific-Magnets/dp/B07VZN77RP/ref=sr_1_9?crid=352NWQYYXHVIL&dib=eyJ2IjoiMSJ9.xT52QFoZU0pxPw62uM4VTgWZgpz82vZi6ygq2vfx0532U4_z5dBOScCYFBarKwZ2GKpAZqVLdUtN_dhxE_4mIlTdY8mu4-7tlU6gdZpr8zel6f_C5USmPX9FM6PLz2dhOkVrUMdWVZHrUR7H109Zzn8A7hKpWaQtSjOe_mk0Zv9TN55oJiM5tSihiv8A2S6M63_MRsjV9tcaXhLGf1DBc2nm_ostfmMVGrhwt5tsNVQ.9TTFoO5kuEq_qmk0sNSGZRKUiLswtSifF_0oskkYZ1g&dib_tag=se&keywords=5+x+10+round+magnet&qid=1763836159&sprefix=5+x+10+round+magnet%2Caps%2C161&sr=8-9)

Descrição