Customizable Organizer Box

I made the original box have several different options for even greater customization. Among these are magnetic closure types, no closure, just hinges, or no hinges at all (friction fit lid). I strengthened the hinges and made several options more flexible like being able to change fonts for the different labels. I fixed bugs in the hinges when box width is less than 70mm. I have made it possible to skip separators to make some larger compartments. Sorry, the whole length of the separator has to go, not just a portion.

The code almost doubled in length. There are a few extremes where errors will happen and I've tried to point them all out, I've also colorized the model to help you spot likely issues spots like making the lid too short and wall thickness too thick so you don't lose your magnet hole altogether (if generating a magnetic closure box). I've done my best to eliminate error possibilities, but with several options I will for sure need your help pointing them out if you find one!

This box is so customizable you can use it to generate a box for playing cards, sorting your screws, protecting your minis, and really the possibilities are endless!

I have defaulted it to magnetic(6X2) closure and using a piece of unextruded filament as the hinge pin. This however is fully changeable and customizable to make the box into the box of your liking! I recommend printing boxes with at least 3 walls for added strength. I recommend supports as those hinges aren't so great at floating! If you up the Bottom and Top Edge rounding you'll probably need support on those too!

Descrição