Print Settings

• Printer brand: Bambulabs
• Printer: Bambu P1P
• Rafts: No
• Supports: No
• Resolution: Nozzle 0.40mm / Layer Height 0.20mm
• Infill: Gyroid 15%
• Filament brand: AzureFilm
• Filament color: Purple
• Filament material: PLA

Additional material needed, I listed what I used:

• ruthex RX-M3 x 5,7 threaded inserts for screwholes, (ASIN: B08BCRZZS3)
• insert soldering tool (ASIN: B0CQXG444N) and iron
• ISO 7380 M3-0.5 x 8mm screws for front and back plates
• ISO 7380 M3-0.5 x 6mm screws to mount ITX board
• 2 pushbuttons for power and reset VISSQH (ASIN: B08G49GVQV)
• 2 colored LEDS  2 x 5mm for power and disk activity  CHANZON (ASIN: B0BV3GZFVK)
• a flat cable with dupont connections (ASIN: B07KYHBVR7)

Notes:

• print using a brim for the front and back plates to prevent warping
• for nice effect use a textured PEI plate
• first assemble the back io shield, the 2 sides and a bottom plate, then install the ITX board and finish with the top panel and front plate
• if you use an ASRock N100DC-ITX board, have a look at my cooling solution I also published here [https://www.printables.com/model/784278-n100dc-itx-fan-mount](https://www.printables.com/model/784278-n100dc-itx-fan-mount)