Mouse and door

Mouse Door Hueforge

NOTE: when you open this you will see a big square around the mouse and door once you slice it that will go away

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.68mm

#000000 PLA tekbears+ black Transmission Distance: 1

#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3

#ffffff PLA Jayo White Transmission Distance: 8.2

This print uses 3 unique filaments

Swap Instructions:

Start with tekbears+ black

At layer #9 (0.8mm) swap to BambuLab Basic Blue Gray

At layer #13 (1.12mm) swap to Jayo White for the rest.