PixelStar Tree Topper

Short description

Big pixel star tree topper with a large centered hole that slips over standard tree tips for an instantly retro, 8‑bit look.

Long description

Give your tree a power‑up this season with the PixelStar Tree Topper— a bold, blocky, pixel‑art star designed to sit proudly at your tree’s peak. The model features a generously sized bottom hole so it easily fits over most tree top spikes or branches, creating a secure, low‑fuss topper that channels classic video game nostalgia. Clean, low‑poly geometry prints fast and looks great painted or left raw for a chunky, modern holiday accent.

Key features

Large center hole sized to fit common tree tips and small branches
Pixel art, 8‑bit aesthetic for retro gaming fans
Low‑poly, printer friendly geometry with minimal overhangs
Single-piece topper — no assembly required
Customizable scale to suit tabletop trees or full‑size trees

Printing recommendations

Material: PLA or PETG for easy printing and good surface finish
Layer height: 0.16–0.28 mm for a balance of speed and detail
Infill: 10–25% (higher for larger toppers)
Supports: Likely not needed for most orientations; use minimal supports if you scale very large
Wall/Perimeter: 2–3 perimeters for strength
Hole fit: If the hole is snug, scale the Z axis or use a slightly larger scale in X/Y to loosen the fit by ~2–3%

Sizing tips

Recommended default prints well as a tabletop or small tree topper. To use on larger trees, scale uniformly up to desired size but increase infill and perimeters for structural strength.