A set of Gridfinity 1x1 inserts to organize and store your 8mm shaft router bits! This model specifically contains labelled versions for every router bit contained in this 15-piece Bosch Pro router bit set: [https://www.amazon.de/Bosch-Fr%C3%A4ser-Set-Weichholz-Professional-Kantenfr%C3%A4se/dp/B07MHNSXZT?th=1](https://www.amazon.de/Bosch-Fr%C3%A4ser-Set-Weichholz-Professional-Kantenfr%C3%A4se/dp/B07MHNSXZT?th=1)

These Bosch Gridfinity inserts are all contained on the first plate. There is a second plate which contains 6x V-Groove router bits, detailed below. And a third plate of miscellaneous bits that I had on hand. I've also included a `.step` file in the uploads that is a blank 8mm shaft Gridfinity insert onto which you can put whichever text you'd like via the Bambu Studio / Orcaslicer / etc. text tool.

The included bits from the Bosch set (Plate 1) are:

• 12mm Roman Ogee (22mm OD)
• 12mm Cove (29mm OD)
• 25 Deg Chamfer (13mm OD)
• 45 Deg Chamfer (16mm OD)
• 20mm Straight (8mm OD)
• 30mm Straight (10mm OD)
• 30mm Straight (16mm OD)
• 12 Deg Dovetail (12mm OD)
• 60 Deg V-Groove (18mm OD)
• 10mm Round Over (19mm OD)
• 13mm Round Over (25mm OD)
• 25mm Flush Trim (13mm OD)
• 25mm Flush Trim (18mm OD)
• 4mm Slotting
• 13mm Rabbetting

The V-Groove bits from Plate 2 include:

• 60 Deg V-Groove (22mm OD)
• 90 Deg V-Groove (22mm OD)
• 120 Deg V-Groove (22mm OD)
• 60 Deg V-Groove (32mm OD)
• 90 Deg V-Groove (32mm OD)
• 120 Deg V-Groove (32mm OD)

Plate 3 includes:

• 40mm Surfacing

The 3mf is setup to print as a multi-color print with an AMS. However, the models are all designed with the text embossed, meaning that you can also easily print these multi-color without an AMS. Simply add a pause point on the first layer of the text. Your printer will pause there BEFORE starting the extrusion for that layer, at which point you can manually change the filament from the first base color to whichever color you'd like for the text and then press resume.