Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.44mm

Filaments Used:
    PLA Bambu Basic Black  Transmission Distance: 0.3
    PLA BambuLab Basic Green  Transmission Distance: 2
    PLA BambuLab Basic Blue  Transmission Distance: 4
    PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Green
    At layer #10 (0.88mm) swap to Blue
    At layer #12 (1.04mm) swap to Jade White for the rest.