An arrow for the item frame I designed. This item uses two of the neodymium magnets (check the bottom of the description for the link). The profile will have the pause necessary to insert the magnets at the right time. The magnets should fit snug, so no super glue is required to hold them in place. Just be sure to insert the magnets in the right direction so they attach to the item frame correctly!

This model is support free and does not require the AMS. If you are not using the AMS, just be sure to add color switch pauses at the same layers as in the print profile.

With this profile, you can also create the gold spectral arrow.

For the first color in this print, make sure that you use the same color that you used for the background of your item frame, so that it blends in as intended. For mine, I used AMOLEN Marble Brick Red PLA.

This model has two pauses within the profile. For the first pause, this is where you will insert the two magnets. The second pause is for people who have one AMS (like me) and need to add the light gray and white filament, in order to print the arrow head correctly. You will insert the light gray filament into slot one, and the white filament into slot two. You should also map the light gray filament to use AMS slot A1, and the white filament to AMS slot A2. I have attached an image of what the AMS slots should look like when you go to send the file to your printer.

The six filament colors/brands I used in sequence are:

AMOLEN Marble Brick Red PLA

CCTREE Dark Brown PLA

Overture Sedimentary Rock PLA

Inland Gray PLA+

Inland Light Gray Tough PLA

El3goo White Rapid PLA+

The link for the magnets is included in the item frame model on my page:

[https://makerworld.com/en/models/1249292-no-ams-needed-minecraft-item-frame-magnetic#profileId-1271479](https://makerworld.com/en/models/1249292-no-ams-needed-minecraft-item-frame-magnetic#profileId-1271479)