🔧 Baldrick 8 + Raspberry Pi 4 + Buck Converter + Meanwell PSU Mount

After spending way too long perfecting this instead of working on my light sequences 😅, I finally have a clean and functional mount that ties it all together!

🧩 What It Fits

• Baldrick 8
• Raspberry Pi 4
• 5V Buck Converter
• Meanwell PSU

🧰 Additional Supplies

• 2 × M4 x 8mm bolts – to mount the print to the PSU
• 4 × M3 heat inserts
• 4 × M2.5 heat inserts
• 4 × M3 standoffs (6×6 mm)
• 4 × M2.5 standoffs (6×6 mm)
• 4 × M3 x 6mm screws – to mount the Baldrick 8
• 4 × M2.5 x 6mm screws – to mount the Raspberry Pi
• Space provided for a 5V buck converter [https://www.amazon.com.au/dp/B0D5V5YDC3?ref=ppx_yo2ov_dt_b_fed_asin_title](https://www.amazon.com.au/dp/B0D5V5YDC3?ref=ppx_yo2ov_dt_b_fed_asin_title)

💡 Design Highlights

• Mounts to one side only to reduce the overall width
• Moves the Raspberry Pi away from the edge, allowing easy SD card removal even if the PSU is close
• Vent holes and raised standoffs to improve airflow and cooling
• Clean cable routing and solid mounting points for all components

🧱 Recommended Material

Printed in PETG – my Christmas is in summer, so it can get warm!
I recommend sticking with PETG (or other heat-resistant filament) due to the potential heat from the PSU and Pi.