笔盒文具盒收纳盒（卷帘门、无螺丝、A1mini可打印）
Pencil Case and Stationery Storage Box (Roll-up Door, Screw-free, A1 Mini Printable)

这个模型我和我的女儿都很喜欢，放笔、条形工具或一些杂物都很方便和美观，但是原始模型需要螺丝固定且尺寸过大，我的A1mini打不了，于是我重新设计了这个模型，不再需要螺丝（改为弹性卡扣连接），优化了尺寸使A1mini可以打印，且为门把手增加了手扣空间，优化了两侧的扣合部分使底部在按压时不会有塌陷感~~~等等。

模型尺寸：200mm（长）*50mm（宽）*50mm（高）

注意事项：
1.组装时先放入卷帘门，且务必对齐所有卡扣后再按入
2.如果想都开合操作更顺畅，可以在卷帘门的两侧抹些凡士林
3.如需拆卸，需要用到撬棍（装好后很紧密，无必要勿拆开）

4.门和连接件建议使用PETG打印

希望大家可以喜欢这个模型:)

My daughter and I both really like this model. It's very convenient and aesthetically pleasing for holding pens, bar tools, or some miscellaneous items. However, the original model required screws to be fixed and was too large; my A1 mini couldn't print it. So I redesigned this model: it no longer requires screws (replaced with elastic snap-fit connections), optimized the size so that the A1 mini can print it, added a hand grip space for the door handle, and improved the snap-fit parts on both sides so that the bottom won't collapse when pressed, and more.  

Model dimensions: 200mm (length) * 50mm (width) * 50mm (height)  

Notes:  
1. When assembling, first insert the roller shutter, and make sure all snaps are aligned before pressing in.  
2. If you want smoother opening and closing, you can apply some petroleum jelly on both sides of the roller shutter.  
3. For disassembly, a crowbar is needed (once assembled, it is very tight; do not disassemble unless necessary).  

4. It is recommended to print the door and connectors using PETG.

I hope everyone likes this model :)