ℹ Tips for printing:

• Filament: PLA
• Supports: No!
• Layer height: 0.16mm
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: -
• Detect thin walls: -
• Brim: No!
• BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
• Info‼: Do not scale the Squirrel any smaller otherwise the connections will no longer work!
• Info‼: If you apply too much force to the legs they may break because the connections are small!
• Info‼: Please be careful when removing the Squirrel from the print bed!

------------------------------------------------------

❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

------------------------------------------------------

Colors and filament I used (4 Color):

• PLA Matte / White
• PLA Matte / Black
• PLA Matte / Dark Brown
• PLA Matte / Light Brown

------------------------------------------------------