New Bookmark!

This time inspired by a well known saga. I started reading it and I was hooked so I thought I would love to have a specific boormark for my books, and there it is!

The models come with 4 holes in the corners and cord hole in the top section. Feel free to remove and or play with them as you see fit.

As usual you can scale on X&Y axis but do not scale on Z to not mess up layers and color changes.

If you do resize please remember to uncheck uniform scale in the interface to avoid problems.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 40.08x150.01mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA JAYO Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA JAYO White Transmission Distance: 7.2
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #14 (1.2mm) swap to White for the rest.

If you are not using an AMS you will need to set pauses accordingly in the slicer and swap color manually.

Consider browsing my Bookmark Collection for new bookmarks to print!