这是沥水花盆和水培花盆，需要简单的组装（如图所示），分别可以用来种植土培和水培植物，适合用于园艺种植。

沥水花盆采用低多边形设计，沥水盆底通过卡扣固定在主体上。

水培花盆采用锥形设计，开有大孔洞，水容量大。

打印方面，建议使用PLA或PETG（更耐用）。支撑较少，可用尖嘴钳拆除，A1 mini可打印。

These are drainage pots and hydroponic pots, requiring simple assembly (as shown in the picture). They can be used for growing soil-based and hydroponic plants, respectively, and are suitable for gardening purposes.

The drainage pot features a low-poly design, with the draining base fixed to the main body via a clip.

The hydroponic pot has a conical design with large openings and a high water capacity.

For printing, PLA or PETG (more durable) is recommended. Minimal support is needed, and it can be removed with needle-nose pliers. It is printable on an A1 mini.

沥水花盆由qiji1225设计，水培花盆由橡果设计

The draining flower pot is designed by qiji1225, and the hydroponic flower pot is designed by Acorn Jayden.

感谢橡果！Thank you,Acorn_Jayden!

联合发布声明：

1. 这是橡果.cn、 qiji1225（包括其全球站）联合发布的模型
2. 请勿他人盗用
3. 此模型经双方同意后发布，不属于版权问题
4. 橡果.cn负责设计第一盘及打印1、2盘；qiji1225 负责第二盘的设计

请勿盗用我们的模型并重新发布或用于商业用途，这必定会面临版权申诉！