A friendly ghost for you to squish and bend👻If you've seen my Bendy Slime model, I guess you are familiar with how it works :) 

Compatible with A1 MINI printers and doesn't need AMS to print in two colors (please read the description below to know how to change colors).

In the video below you can see the printing process and flexibility of the model:

Btw, you can leave a like&sub if you want to support me on YouTube, thank you! ヽ(*・ω・)ﾉ～ ♡

Based on the feedback about the base durability of the Slime Fidget model, I decided to make this one twice as thick - now it's 0.4 mm. It’s a bit more durable now, but still – please handle it gently. It’s fun to bend, but it may not withstand strong pressure.

Color swap - without AMS

On the photo you’ll see a two-color print – but no AMS system is needed.
Instead, I’ve used layer-based filament swaps triggered by short pauses in the g-code, which lets you change the filament mid-print without any special hardware. 

When the print stops by itself, unload the filament and load the new one - just like you do normally. Then resume the print.

If you don’t want to deal with filament changes, just remove the pause from your sliced file or press “Resume” when the printer stops – it’ll continue printing in the same color.

Filaments that worked well for me:

• Bambu PLA Matte 
• Fiberlogy PLA

Printer tested on: Bambu Lab P1S 

Hotend: 0.4 mm Stainless Steel

Additional tools: not needed

A1 MINI compatible: yes