DESCRIPTION

Fully functional PokeBall made to be an exact replica! 

Uses only 3D printed parts and super glue yet has fully functional hinge and button which presses in and unlocks.

The button also hides its own mechanism from view adding to the authenticity. 

Parts have notches and grooves to ensure perfect alignment while glueing allowing you to have a perfect model with ease.

A stand is also present.

PRINTING INSTRUCTIONS

I added brim for more bed adhesion and 0.16 layer height.

1. Do a dry fit of all the parts.
2. Super glue the lids to their respective 'Inner Shells'.
3. Place the 'Button' inside the 'Outer Button Smaller' with the two bumps positioned downwards to fit into the ‘Inner Shell Bottom’
4. Glue the 'Outer Button Smaller' to the 'Inner Shell Top' being careful not to glue the 'Inner Button' in place as it must be able to be pressed.

5. Insert the hinge pin attaching the two halves together and glue in place also taking care not to glue the hinge in a fixed position.

    

You will need:

• 1x Red Lid
• 1x White Lid
• 1x Inner Shell Top
• 1x Inner Shell Bottom
• 1x Button
• 1x Outer Button Smaller
• 1x Stand (optional)
• Super Glue
   

Happy Printing and Go Catch Them All!