Radiomaster / Jumper Wall Mount - Controller + Module

I started this hobby (FPV Drones) and couldn't find a wall mount which would fit my radio. So I decided to design my own.

I designed it in a way to be also possible to use it with other types of radios, so with other sizes (I hope so).

Here you have a top part where the radio is holding on it and then there is a bottom part which will help the top part not to have all the weight of the radio. This way you can also place the bottom part a bit lower or higher, for example, if your radio is longer or shorter than this one.

The two parts are with 55% infill density to make it stronger and not break.

The arm on the top of the controller is quite long and I wanted it to stay good vertically, so I used the space between the controller and the wall as a holder for the Module, so you don't lose it somewhere at home and need to search for it.

Let me know if it works for you too! :)