If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:
 

Skeleton [framed] is a spooky chic bookmark that frames a full skeleton inside a vivid red swirl border, perfect for horror fans, anatomy lovers, and readers who enjoy a touch of dark elegance 🔥💀

Features:

• High relief bones with crisp rib and joint detail for depth that looks great yet stays page friendly 🦴✨
• Red curling frame that guides the eye from skull to toes and adds gothic drama 📕❤️
• Soft silver tassel for quick page finding and a premium finish 🎀📚
• Easy to paint with dry brush or wash techniques to pop highlights and shadows 🎨🖌️

Maker notes:

• While the included profiles are carefully optimized for a 0.4 mm nozzle to retain detail across different settings, this model is still best printed with a 0.2 mm nozzle for the sharpest ribs, phalanges, and frame curls 🧩🖨️

   

• Make sure to clean the build plate with dishwashing soap and warm water before printing. Handwashing soaps should never be used to clean build plates because moisturizers can harm adhesion 🧼💧

   

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA eSun Bone White Transmission Distance: 3.9
PLA Jayo Meta Gray Transmission Distance: 2.1 / Amazon
PLA+ Jayo 2.0 White Transmission Distance: 7.5 / Amazon
PLA eSun Fire Engine Red Transmission Distance: 2.9

Color Pallete:

Swap Instructions:

Start with Bone White
    At layer #4 (0.41mm) swap to Meta Gray
    At layer #13 (1.13mm) swap to Bone White
    At layer #17 (1.45mm) swap to White
    At layer #20 (1.69mm) swap to Fire Engine Red for the rest.