Hippogriff Bookmark

To start the fantasy collection, here is a Hippogriff on a rock at sunset. This print takes 5 colors.

Project: hippogriff.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50.04x150.03mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
    #000000 PLA BambuLab Basic Black Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
    #f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9
    #ffe17f PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #14 (1.2mm) swap to Hot Pink
    At layer #19 (1.6mm) swap to Lemon Yellow
    At layer #23 (1.92mm) swap to Jade White for the rest.

Descrição