This is a strong and large universal hook for many possible usecases. 

There are 4 pre-defined sizes but you can also generate your own hook with the “customize” button. 

I use 2 hooks of them for holding my rotary clothesline in my garden shed (last photo).

Further example usecases: 

• Holding ropes/hoses 
• Holding ladders (2 hooks) 
• Holding garden tools like broom, shovels etc (2 hooks) 

 Holding wood slats (at least 2 hooks) 
 
 

Dimension overview: 

Dim A: Length of the flat area 

Dim B: Length of the slope 

Dim C: Width of the frame 

Dim D: Thickness  
 
 

Size overview: 

Size S: (A1 Mini compatible) 

Dim A: 50mm

Dim B: 20mm

Dim C: 12mm

Dim D: 20mm

Size M: (A1 Mini compatible) 

Dim A: 100mm

Dim B: 25mm

Dim C: 15mm

Dim D: 25mm

Size L: 

Dim A: 150mm

Dim B: 35mm

Dim C: 20mm

Dim D: 30mm

Size XL: (Only H2 series) 

Dim A: 200mm

Dim B: 45mm

Dim C: 25mm

Dim D: 35mm

You can change these 4 dimensions after clicking on the customize button. 

For example: You need the 200mm Length (Dim A) for lightweight objects. In this case you could increase the thickness and frame width to save filament and time. 

If you look for a smaller decent hook: LINK