Link to my collection of works 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm

Filaments Used:  (* = Owned)
    #ffffff * PETG GERG White(белый)  Transmission Distance: 4.7
    #4c5f71 * PETG FDplast blue grey  Transmission Distance: 3
    #93a3a4 * PETG FDplast Light grey(светло серый)  Transmission Distance: 0.8
    #000000 * PETG GREG Black(черный)  Transmission Distance: 1.4
This print uses 4 unique filaments

Swap Instructions:
    Start with White(белый)
    At layer #13 (1.2mm) swap to blue grey
    At layer #14 (1.28mm) swap to Light grey(светло серый)
    At layer #15 (1.36mm) swap to Black(черный) for the rest.