A simple, minimalistic wall clock. Should work with most Quarz mechanisms with a 56x56mm housing and roughly 9mm shaft length (see picture). 

The mechanism I used:

[https://aliexpress.com/item/1005002837497716.html](https://aliexpress.com/item/1005002837497716.html)

Make sure to print the glass in transparent PETG. Some tweaking of the flow rate and temperatures may be necessary to get the best results with whatever brand of filament you use. To achieve the frosted glass look, it can also help to lightly sand the surface with a fine grit after printing. 

Enjoy!