a halloween skull and cross bones to add to your scary decs and add atmosphere , enjoy 

i replaced usual hf colour light grey to caramel to give a nice bone effect came out quite well i thought much more realistic 

project  skull and cross bones 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150mm x150mm  in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.32mm and the Actual Depth is 2.32mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab dark grey Transmission Distance: 3
    PLA Bambu LAB Caramel  Transmission Distance: 1
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.68mm) swap to d grey
    At layer #13 (1.08mm) swap to caramel 
    At layer #20(1.72mm) swap to White for the rest.

personal use only please on these hue forges