Evernight Chibi HueForge

I printed it at 40% scale for the X and Y axis. Please do not use ironing like I did :(

Project: Evernight Chibi

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.4mm

Filaments Used:
    #080a0d PLA PolyLite Black Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
    #cd007b * PLA BambuLab Basic Magenta Transmission Distance: 3
    #e2dedb PLA PolyLite White Transmission Distance: 5.2
This print uses 4 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #13 (1.12mm) swap to BambuLab Basic Blue Gray
    At layer #17 (1.44mm) swap to BambuLab Basic Magenta
    At layer #24 (2mm) swap to PolyLite White for the rest.
-----------------------------------------------------------------------------------------------------------------------------------

Project: Evernight More Filaments (( For 0.2mm nozzle! ))

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.24mm
The Max allowed Thickness is 2mm and the Actual Thickness is 1.6mm

Filaments Used: (* = Owned)
    #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    #62483e PLA Chrominal Chestnut Transmission Distance: 4
    #f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9
    #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 4
    #dde5ed PLA BambuLab Tough Cream White Transmission Distance: 10
This print uses 6 unique filaments

Swap Instructions:
    Start with BambuLab Matte Charcoal
    At layer #5 (0.32mm) swap to Chrominal Chestnut
    At layer #9 (0.48mm) swap to BambuLab Basic Hot Pink
    At layer #11 (0.56mm) swap to BambuLab Matte Ivory White
    At layer #18 (0.84mm) swap to BambuLab Matte Charcoal
    At layer #20 (0.92mm) swap to BambuLab Basic Red
    At layer #29 (1.28mm) swap to BambuLab Basic Hot Pink
    At layer #30 (1.32mm) swap to BambuLab Tough Cream White for the rest.

Descrição