Compact Collapsible Dice Tower (updated)

This “Compact Collapsible Dice Tower” is an amazing crate of wonders that can be easily packaged up into the box that also serves as a dice catcher!  GM/DMs at all the best gaming tables will be envious of your “nat 20’s” and suave dice tower that packs down into such a rugged compact container!

Jokes aside, a couple of notes on this;

• Everything is friction fit, from the lid on the box to the parts of the tower.  This has been tested on Bambu printers using a variety of PLA filaments.  Depending on your filament/printer/tolerances/etc., you may need to tweak things slightly.
  • If something is too tight, a light sanding will sort it out in most cases.
  • If something is too loose, a drop of superglue (unassembled, wait for it to dry) can provide the friction needed for a good experience.
• This is provided with the original “thin” lid and the newer “thick” lid, choose wisely.  (They are interchangeable.)
• Blank “walls” have been provided for your own creative designs/control.
• The tower is not really suited for metal dice, so if you use them, your mileage may vary.
• A spot of felt in the bottom of the lid, and trays makes for an extra-super classy rolling surface, keeps the noise down a tad, and almost guarantees natural 20's ;)

Looking for dice, pen & pencil storage -and- a nice compact collapsible dice tower?  Check this one out;

• [https://makerworld.com/en/models/729094](https://makerworld.com/en/models/729094)