Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: [https://buymeacoffee.com/heyben](https://buymeacoffee.com/heyben)
Wolf Bookmark - Flatforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50.03x150mm in size
The model is 1.36mm thick.
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.2
#9199a4 PLA Panchroma PLA Translucent Grey Transmission Distance: 6.8
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.8
#ffffff PLA SUNLU Clear Transmission Distance: 100
This print uses 4 unique filaments
Swap Instructions:
You do not set Layer Swaps in the slicer.
Colors are assigned them in the Object view tab by clicking on the colored box
and either pressing the number of the filament or clicking a second time and selecting from the dropdown. (This is preset in the .3MF file)
FlatForge Printing Instructions:
FlatForge prints REQUIRE automatic Filament Swapping because colors are mixed throughout all layers.
This was printed face-down on a smooth high-temp build plate.
More Bookmarks can be found here
Hueforge Bookmark Book Nook can be found here
Check out my other models and hueforge files here
Don't forget to post pictures of your prints! Enjoy!
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta