The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #12 (1.04mm) swap to Yellow
    At layer #19 (1.6mm) swap to turquoise 
    At layer #24 (2mm) swap to Jade White for the rest.
 

My print profile is set ready to print :)
if you enjoyed please give me a boost it doesn't cost you anything :)

Leaving a comment, boost and a picture of your print would be very much appreciated :)