I was given my old Ryzen 3 from my first PC (APU, pretty awful today) and after a few days I realised that it had bent pins! After noticing this, I didn't want to waste it so I came up with the idea of making a frame for it to be hung up on my wall.

***THIS IS NOT AM5! THIS IS INTENDED FOR AM4 (PGA) CPUs AND WILL NOT WORK WITH ANY OTHER SOCKET!***

You have two different options for assembling it- either use the small square and glue it into the small square slot at the back, or use the tray option and glue it to the pins. The former is more reliable, but if for any reason you prefer the second then I would recommend printing it with a thicker bottom layer to account for its smaller height. The file doesn't have any lettering on the frame- I recommend around size 10-11 with the thickness set to either 0.5 or 1. 

I printed this with Bambu PLA Wood (Black Walnut) and used Revell epoxy glue to stick everything together. While mine printed with some overextrusion this was printed shortly before I re-calibrated so it is almost certainly a printer issue.