Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
SUPERMAN BOOKMARK
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 37.66x160mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Kingroon Red Transmission Distance: 4.2
PLA BambuLab Basic Cyan Transmission Distance: 3.5
PLA Kexcelled Sky Blue Transmission Distance: 2.6
PLA BambuLab Basic Yellow Transmission Distance: 5.9
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #14 (1.2mm) swap to Cyan
At layer #18 (1.52mm) swap to Sky Blue
At layer #23 (1.92mm) swap to Yellow for the rest.
