Star Wars bookmark 2

BOOKMARKSET Star Wars 2 of 2

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 38.39x160.01mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Cyan Transmission Distance: 3.5
    PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue
    At layer #13 (1.12mm) swap to Cyan
    At layer #20 (1.68mm) swap to Jade White for the rest.

Descrição