Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.71618mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #75787b PLA anycubik textGray  Transmission Distance: 2.4
    #ffffff PLA Generic White  Transmission Distance: 4
    #ae272b PLA Generic red  Transmission Distance: 6.4
    #ff5500 PLA Generic orange  Transmission Distance: 7.2
    #ffff00 PLA Generic yellow  Transmission Distance: 7.2
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.56mm) swap to Blue Gray
    At layer #14 (0.68mm) swap to textGray
    At layer #19 (0.88mm) swap to White
    At layer #27 (1.2mm) swap to red
    At layer #31 (1.36mm) swap to orange
    At layer #36 (1.56mm) swap to yellow for the rest.