This is my parametric box with a clean outside and customizable ribs inside!

This parametric box gives you perfect control over the desired dimensions for your project! You can change the length, width, heigth and corner radii. On top you can customize the ribs inside (number of ribs and position). Wheter you want to store something tiny or securely store a larger object, here is your solution! 

The clean design allows you to make further changes! For example, add fuzzy skin to the lid or deboss a special pattern or even your name on the lid.

Features:

• fully customizable length, width, heigth and corner radii
• customizable ribs on the inside (number of ribs and position)
• non- printed parts: none!
• clean 3d printable design

Dimensions:

Please note that the adjustable dimensions are measured inside. The model has a shadow gap to prevent light from shining through the seam.

After printing:

Remove the custom support at the clasp by simply snapping it off. It should snap off easily.

Assembly:

Place the lid on the box and thread a piece of filament through the holes provided for the joints. Cut the filament flush on both sides and heat it with a soldering iron to weld it to the joint. Repeat this process for both joints and the clasp. If you don't have a soldering iron handy, use a small screwdriver or similar tool to heat it with a lighter and then weld the filament with it.