Always loved DM when I was a kid. I'm hoping to make a collection of '80s Saturday morning cartoons in Hueforge.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:

#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6

#c4402b PLA+ eSun HS Red Transmission Distance: 1.8

#ffffff PLA Default White Transmission Distance: 5

#ffff00 PLA Creality Hyper Yellow Transmission Distance: 4.7

This print uses 4 unique filaments

Swap Instructions:

Start with Charcoal

At layer #12 (1.04mm) swap to Red

At layer #15 (1.28mm) swap to White

At layer #21 (1.76mm) swap to Yellow for the rest.