[ English description available, please turn off auto-translate. ]

你没看错！仅需2g耗材，超快速打印，所有料盘通吃，不伤耗材的耗材夹！
This filament friendly, all spools fitting filament clip uses only 2g with super fast print time!

[ 描述／Description ]

[ZH] 为了给非拓竹耗材适配耗材夹，我尝试了很多款式……很多都无法牢固固定，要不就是使用麻烦，再不然就是能够牢固固定但是耗材会变形……无奈下我根据自己需求设计了这款不伤耗材、不会脱落、使用相对便捷的通用耗材夹。希望能够使用你的使用场景。

[EN] I have tried many different types of filament clips for my non-Bambulab filaments, most failed to secure filaments properly, some can be tight but prolonged storage will bend filament to a degree that it will need to be trimmed before inserting into AMS, others are  inconvenient to use on a daily bases… Having being so fustrated, I designed this filament clip meeting my needs. It won't bend filament, it will stay in place, it is conveniently enough to use on daily bases. I hope it will also meet your needs.

[ 打印注意事项／Printing Instructions ]

• 如果你只使用PLA耗材，可以使用PLA打印这款耗材夹；
  If you only use PLA, you can print this filament clip with PLA;
• 建议使用PETG进行打印；
  RECOMMEND printing using PETG;
• 推荐使用ABS、ASA、HT-PLA等耐高温耗材。
  FOR BEST USE CASE, print with high tempeature resistant materials such as ABS, ASA, HT-PLA. 

[ZH：注意] 为了避免进行高温烘干耗材时（如：烘干PETG、ABS、ASA等需要进行超过45℃烘干的耗材） 耗材夹受热变形导致耗材松散……我已上传相对应标识的耗材夹打印配置。如使用ABS/ASA材质打印耗材夹，请使用带有对应标识的打印配置，以便可以区分耐高温耗材夹！

[EN: Caution] To avoid filament come loose due to clip wraping during high tempeature drying (eg. when drying materials require tempeature over 45℃, such as PETG, ABS, ASA)… I have published clips with corresponding labels. Eg, when printing clip(s) using ABS/ASA material, please use print profile with corresponding labels to distinguish between low/high tempeature resistant clips.