Super Glue Squeezer!

Do yourself a favor with this ergonomic super glue squeezer, designed for precision, control, and compatibility. This 3-part print assembles in minutes and fits both 2g Loctite Super Glue Gel and 3g Gorilla Super Glue tubes.

-Print Time: ~1 hour

-Parts: 3 total (SGS_Outer_v5, SGS_Squeezer_v5, SGS_Clasp_v5)

-Compatibility: Loctite 2g & Gorilla 3g super glue tubes

-Function: Improves squeeze control, can save money, and provides a better grip when applying super glue.

Assembly Instructions:

Use the reference image provided to follow these steps:

1. Insert the glue tube (with cap removed) into the hole inside the outer shell. Rotate until the label is visible through the side openings.
2. Flex the shell outward slightly and slide the squeezer in from the side. Ensure the shell’s internal pins lock into place—you’ll feel it click when aligned correctly.
3. Confirm alignment visually. The squeezer should sit flush and secure inside the shell.
4. Slide the clasp onto the bottom of the outer shell until all edges are flush.
5. Verify fit using the reference image. The clasp should fully seat without gaps.
6. Screw the glue cap back onto the tube’s threads. Tighten firmly to prevent leakage during use.

For Loctite: Slightly twist the glue cap on after completing step 1