This is a very basic alignment tool for your Siser Juliet mat. I have a hard time aligning my mat to the guide it has so I created this to align to the right side of the machine to keep my mat straight when I load my mat.  The reason I have it aligned to the right is I typically am closer to the right side when I work with my machine, and it has less things to have to move to make it work. On the left side of machine the first roller guide is hard to move and with the cut out makes it harder to keep the guide in place.

Tip: when you load your mat I typically try to align my mat at the center point of the mat versus the top of the mat so it is more even when it goes forward and back.

Instructions:

1. I put a piece of double-sided tape on the end to hold it in place – it will move if you do not adhere it down and cause issues or be pulled into the mat/blade
2. With the roller guides up you can slide the guide into place. Align the top of the guide with the crack for the door flap (it should be able to close)
   1. Make sure the lip is not in the path of the blade – you can see where the blade does on the white strip there is a line.  
   2. You may have to move the rollers to align with the size of your mat or preference.
3. Now when you load your mat you should be able to align it to the guide and lower your rollers.

Hope you enjoy this simple guide to aligning your mat.