This mount is designed as a practical support for installing ceiling lamps.
It provides a stable fixing point for lamps or other lightweight objects on the ceiling.

Features

• Dimensions: 124 × 25 mm (see drawing)
• Three central mounting holes for screws (M3 recommended)
• Two side holes (6 mm from the edges) for additional fixation or optional M3 brass heat-set inserts (quite tight)
• Suggested material: PETG, or ABS for extra durability

Print Recommendations

• Layer height: 0.16 mm for a clean finish
• Wall thickness: at least 6 perimeters for maximum strength
• Infill: ≥ 40 % (Gyroid or Grid recommended)
• Print slower (around 40 mm/s) to improve layer adhesion and overall strength
• Nozzle: 0.4 mm
• Print time: approx. 40 minutes

Application

Simply screw the mount to the ceiling and attach your lamp securely.

Disclaimer

This model is provided as-is, without any warranty of strength, safety, or suitability for electrical installations.
Use at your own risk. Always ensure that your mounting setup is appropriate for the weight of the lamp and complies with local safety regulations.