If you're like me, one of the most satisfying things about having a Gridfinity organization system in your kitchen is having everything stay in place when you open and close the drawers.  This bin was designed with the goal of keeping that satisfying feeling intact for your Thermapen.

This design allows the Thermapen to sit deeper into the bin which prevents any wobble. The side walls are also set snuggly with the same goal in mind.  

The bin is designed for the Gridfinity base system and uses the minimum 4 x 1 configuration.  The standard height is about 39mm, which is a 5u bin with the stacking lip on the top (mostly there for the looks).  If that size does not work for you, or if you're like me and you want all of your bins in the same drawer to have the same height,  then you can specify your own exact height of this bin using the Customize feature and configure it for your exact needs.  Note, you cannot subtract from the total height as there really isn't any room to make that work.  

This is the first parametric model that I've designed and uploaded from Fusion, so if you have any questions or feedback please let me know.  

Thanks, and happy printing.