Hexagonal Medal Display

Meant to neatly showcase your biggest achievements on your wall. Compatible with 2 small command strips or a single nail.
I realized most of my medals use a 38mm ribbon or smaller so I made the ribbon gap 39mm to accommodate most awards. I made a special version for Paris Olympic medals that is 6mm smaller all around with a 29mm gap so they looks as clean as possible.

I Included a photo showing how to put a medal in the display but I will also try to summarize it:

Medals connected to the ribbon through a hoop do not work. Only medals where the ribbon goes through the design. At each of the following steps make sure the ribbon is pulled tight for the cleanest look:

Push the ribbon through the top middle slot.
Feed back through the angled portion in the middle.
Push through left slot.
Feed back though flat option in the middle.
Push through right slot.
Finish by tucking under 2 clips and shoving excess under command strip bridge.

All medals are slightly different sizes so adjust tension all around until the medal sits where you want.

Descrição