Robot Selfie

Project: robot.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 120x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 1.44mm

Filaments Used:
    #658697 PLA Overture Gray Blue  Transmission Distance: 6.5
    #080a0d PLA PolyLite Black  Transmission Distance: 0.1
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 6.8

This print uses 3 unique filaments

Swap Instructions:
    Start with Gray Blue
    At layer #7 (0.64mm) swap to Black
    At layer #10 (0.88mm) swap to Jade White for the rest.