This Hueforge multi-color print recreates the iconic cover art from Wolverine (Vol. 2) #8 (1989), drawn by John Buscema and inked by Bill Sienkiewicz. The piece captures Wolverine mid-snarl, with the reflection of the Hulk shimmering across his adamantium claws — a perfect tribute to one of Marvel’s most legendary rivalries.

Project: Wolverine Hulk.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 162.69x235mm in size
You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 3.2mm and the Actual Thickness is 3.2mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #57361c PLA Overture Chocolate  Transmission Distance: 0.2
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #00ae42 PLA BambuLab Basic BambuLab Green  Transmission Distance: 2
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
This print uses 8 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Chocolate
    At layer #20 (1.68mm) swap to Jade White
    At layer #22 (1.84mm) swap to Pumpkin Orange
    At layer #23 (1.92mm) swap to Red
    At layer #24 (2mm) swap to BambuLab Green
    At layer #27 (2.24mm) swap to Pumpkin Orange
    At layer #32 (2.64mm) swap to Yellow

Border Only Colors from here until the end.
    At layer #34 (2.8mm) swap to Jade White

This slider is set higher than the mesh depth.  It is not affecting your final mesh.  Consider removing it.
    At layer #42 (3.44mm) swap to Black for the rest.