This 3D printed bookmark is a rad little piece featuring the lovable character Stitch from Disney's Lilo & Stitch! 😎 The bookmark's body is black with a slick white design of Stitch peeking out from the bottom edge, lookin' super cute with his big eyes and ears. There's another white Stitch design sorta blurred out toward the top. This bookmark's lookin' fresh sitting on the print bed. Perfect for bookmarking your favorite reads or gifting to a Disney fan!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 51x152mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 1.6mm and the Actual Thickness is 1.6mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #545454 PLA BambuLab Basic Dark Gray  Transmission Distance: 0.6
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Dark Gray
    At layer #14 (1.2mm) swap to Blue
    At layer #18 (1.52mm) swap to Jade White for the rest.

This is something that I'm really enjoying and still just beginning to learn the process of. Any likes, comments, or suggestions will help greatly. Happy printing!!

( If you enjoy the model, a Boost would be greatly appreciated)